Approved Laboratory List
Casey Products, Inc.

Laboratory Listing by Accreditation Body
Laboratory Listing by Country & State
Laboratory Listing by Lab Name
Lab Code: N200278-0
Lab Name: Casey Products, Inc.
Accrediting Body: NVLAP/NIST
Laboratory Contact:
Mr. Michael B Connelly
1955 University Lane
Lisle, IL 60532-4149
Phone: 630-960-3360
Fax: 630-960-3419
E-Mail:

Dimensional Inspection


Dimensional Inspection


External thread parameters - system 21


ANSI/ASME B1.3M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

External thread parameters - system 22


ANSI/ASME B1.3M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

External thread parameters - ISO


ISO 1502 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
ISO General Purpose Metric Screw Threads - Gauging

Dimensions of general purpose fasteners and high-volume machine assembly fasteners


ANSI/ASME B1.16M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Gages and Gaging for Metric M Screw Threads

ANSI/ASME B1.2 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Gages and Gaging for Unified Inch Screw Threads

ANSI/ASME B18.18.1M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Inspection and Quality Assurance for General Purpose Fasteners

ANSI/ASME B18.18.2M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners

MIL-STD-120 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Gage Inspection

Dimensions of ISO grade A and B fasteners


ISO 3269 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Fasteners - Acceptance Inspections

ISO 4759-1 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Tolerances for Fasteners - Part 1: Bolts, Screws, and Nuts with Thread Diameters between 1.6 (inclusive) and 150 mm (inclusive) and Product Grades A, B, and C

Dimensions of ISO grade C fasteners


ISO 3269 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Fasteners - Acceptance Inspections

ISO 4759-1 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Tolerances for Fasteners - Part 1: Bolts, Screws, and Nuts with Thread Diameters between 1.6 (inclusive) and 150 mm (inclusive) and Product Grades A, B, and C

Dimensions of fasteners - hexagon and double hexagon (12 point) and spline sockets


ANSI/ASME B18.3 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Socket Cap, Shoulder and Set Screws (Inch Series)

ANSI/ASME B18.3.1M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Socket Head Cap Screws (Metric Series)

ANSI/ASME B18.3.3M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Hexagon Socket Head Shoulder Screws (Metric Series)

ANSI/ASME B18.3.4M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Hexagon Socket Button Head Cap Screws (Metric Series)

ANSI/ASME B18.3.5M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series)

ANSI/ASME B18.3.6M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Metric Series Socket Set Screws

Internal thread parameters - system 21


ANSI/ASME B1.3M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

Internal thread parameters - system 22


ANSI/ASME B1.3M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

Internal thread parameters - ISO


ISO 1502 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
ISO General Purpose Metric Screw Threads - Gauging

Dimensions of special purpose fasteners and fasteners for highly specialized engineered applications


ANSI/ASME B18.18.3M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Inspection and Quality Assurance for Special Purpose Fasteners

ANSI/ASME B18.18.4M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications

Dimensions of fasteners - straightness


ANSI/ASME B18.2.1 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Square and Hex Bolts and Screws - Inch Series

ANSI/ASME B18.2.3.1M - M
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Metric Hex Cap Screws

ANSI/ASME B18.2.3.2M - M
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Metric Formed Hex Screws

ANSI/ASME B18.2.3.3M - M
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Metric Heavy Hex Screws

ANSI/ASME B18.2.3.4M - M
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Metric Hex Flange Screws

ANSI/ASME B18.2.3.5M - M
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Metric Hex Bolts

ANSI/ASME B18.2.3.6M - M
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Metric Heavy Hex Bolts

ANSI/ASME B18.5.2.2M - M
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Metric Round Head Square Neck Bolts

Mechanical and Physical Testing and Inspection


Coating


Measurement of fastener coating thickness - eddy-current method


ASTM E376 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods

Measurement of fastener coating thickness - magnetic methods


ASTM E376 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods

Embrittlement


Test for embrittlement of metallic coated externally threaded fasteners


ASTM F606 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 7: Test for Embrittlement of Metallic Coated Externally Threaded Fasteners

ASTM F606M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 7: Test for Embrittlement of Metallic Coated Externally Threaded Fasteners

Hardness


Microhardness of fasteners


ASTM E384 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Method for Microhardness of Materials

Rockwell hardness of fasteners


ASTM A370 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products Section 18. Rockwell Test (ASTM E18 is referenced for detailed requirements)

ASTM E18 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

ASTM F606 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets; Sections 4.1, Product Hardness

ASTM F606M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets; Section4.1, Product Hardness

Rockwell superficial hardness of fasteners


ASTM A370 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products Section 18. Rockwell Test

ASTM E18 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

ASTM F606 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers,and Rivets

ASTM F606M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)

Prevailing torque


Prevailing torque


IFI-100/107 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Prevailing-Torque Type Steel Hex and Hex Flange Nuts, Regular and Light Hex Series

Proof


Proof load of full-size externally threaded fasteners


ASTM A370 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Sections A3.2.1.1 through A3.2.1.3 : Proof Load

ASTM F606 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Sections 3.2.1 through 3.2.3: Proof Load (Length Measurement)

ASTM F606M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Sections 3.2.1 through 3.2.3: Proof Load (Length Measurement)

ISO 898-1 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Mechanical Properties of Fasteners - Part 1: Bolts, Screws and Studs. Section 8.4: Proofing Load Test for Full Size Bolts.

SAE J1216 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Test Methods for Metric Threaded Fasteners, Section 3.3: Proof Load (Length Measurement)

SAE J429 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Mechanical and Material Requirements for Externally Threaded Fasteners. Section 5.3: Proof Load (Length Measurement)

Proof load of internally threaded fasteners (nuts)


ASTM A370 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products. Annex A3 - Steel Fasteners, Section A3.5.1: Proof Load

ASTM F606 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 4.2: Proof Load Test

ASTM F606M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 4.2: Proof Load Test

ISO 898-2 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Mechanical Properties of Fasteners - Part 2: Nuts with Specified Proof Load Values. Section 8.1: Proof Load Test

SAE J995 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Mechanical and Material Requirements for Steel Nuts. Section 5.1: Proof Load Test

Tensile


Axial tensile strength of full-size threaded fasteners


ASTM A370 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Section A3.2.1.4: Axial Tension Testing of Full Size Bolts

ASTM F606 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Sections 3.4.1 through 3.4.3: Axial Tension Testing of Full Size Products

ASTM F606M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers and Rivets (Metric) Sections 3.4.1 through 3.4.3: Axial Tension Testing of Full Size Products

ISO 898-1 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Mechanical Properties of Fasteners - Part 1: Bolts, Screws and Studs. Section 8.2: Tensile Test for Full-Size Bolts, Screws and Studs.

SAE J1216 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Test Methods for Metric Threaded Fasteners, Section 3.5: Axial Tensile Strength

SAE J429 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Mechanical and Material Requirements for Externally Threaded Fasteners. Section 5.4: Axial Tensile Strength

Total extension at fracture of externally threaded fasteners


ASTM F606 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 3.7: Total Extension at Fracture Test

ASTM F606M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 3.7: Total Extension at Fracture Test

Wedge tensile strength of full-size threaded fasteners


ASTM A370 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Section A3.2.1.5: Tension Testing of Full Size Bolts with a Wedge, and Section A3.2.1.6: Wedge Testing of HT Bolts Threaded to Head

ASTM F606 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Sections 3.5: Wedge Tension Testing of Full Size Bolts

ASTM F606M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 3.5: Wedge Tension Testing of Full Size Products

ISO 898-1 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Mechanical Properties of Fasteners - Part 1: Bolts, Screws and Studs. Section 8.5: Test for Strength Under Wedge Loading of Full-Size Bolts and Screws (Not Studs)

SAE J1216 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Test Methods for Metric Threaded Fasteners, Section 3.6: Wedge Tensile Strength

SAE J429 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Mechanical and Material Requirements for Externally Threaded Fasteners. Section 5.5: Wedge Tensile Strength

Yield strength of full-size externally threaded fasteners


ASTM F606 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 3.2.4 (Proof Load) Method 2, Yield Strength

ASTM F606M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 3.2.4: (Proof Load) Method 2, Yield Strength

Metallography


Metallography


Decarburization and case depth measurement in fasteners


ASTM A574 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Socket-Head Cap Screws

ASTM A574M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]

ASTM E1077 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens

ASTM F835 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

ASTM F835M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

ASTM F912 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Socket Set Screws

ASTM F912M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Socket Set Screws (Metric)

ISO 898-1 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Mechanical Properties of Fasteners - Part 1: Bolts, Screws and Studs.

ISO 898-5 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Mechanical Properties of Fasteners - Part 5: Set Screws and Similar Threaded Fasteners Not Under Tensile Stresses

SAE J121 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Decarburization in Hardened and Tempered Threaded Fasteners

SAE J121M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Decarburization in Hardened and Tempered Metric Threaded Fasteners

SAE J419 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Methods of Measuring Decarburization

SAE J423 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Methods of Measuring Case Depth

Determination of grain size of fasteners


ASTM E112 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Methods for Determining Average Grain Size

Macroscopic examination of fasteners by etching


ASTM E340 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Test Method for Macroetching Metals and Alloys

ASTM E381 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

Microscopic examination of fasteners by etching


ASTM E407 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Practice for Microetching Metals and Alloys

Surface discontinuities of externally threaded fasteners


ASTM A574 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Socket-Head Cap Screws

ASTM A574M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)

ASTM F788/788M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

ASTM F835 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

ASTM F835M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

ASTM F912 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Socket Set Screws

ASTM F912M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Socket Set Screws (Metric)

ISO 6157-1 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Fasteners - Surface Discontinuities - Part 1: Bolts, Screws, and Studs for General Requirements

ISO 6157-3 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Fasteners - Surface Discontinuities - Part 3: Bolts, Screws, and Studs for Special Requirements

SAE J1061 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Surface Discontinuities on General Application Bolts, Screws, and Studs

SAE J123 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Surface Discontinuities on Bolts, Screws, and Studs

Surface discontinuities of internally threaded fasteners (nuts)


ASTM F812/F812M -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series

ISO 6157-2 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Fasteners - Surface Discontinuities - Part 2: Nuts

SAE J122 -
STATUS: Accredited
Start Date: / / Eff. Date: 04/15/1998 Exp. Date: 03/31/1999
Surface Discontinuities on Nuts