Approved Laboratory List
Laboratory Testing, Inc.

Laboratory Listing by Accreditation Body
Laboratory Listing by Country & State
Laboratory Listing by Lab Name
Lab Code: A2LA117-01
Lab Name: Laboratory Testing, Inc.
Accrediting Body: American Assoc. for Lab Accreditation
Laboratory Contact:
Mr. Arnold L Horoff
120 Mill Street
P.O. Box 249
Dublin, PA 18917
Phone: 215 249 9898
Fax: 215 249 9656
E-Mail:

Chemical Analysis


Chemical Analysis


Combustion analysis for carbon, sulfur, oxygen, nitrogen, and hydrogen


ASTM E1019 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and Iron, Nickel and Cobalt Alloys

Optical emission spectrochemical analysis


ASTM E1086 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique

ASTM E1251 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Argon Atmosphere, Point-to-Plane, Unipolar Self-Initiating Capacitor Discharge

ASTM E415 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel

Solution chemical analysis


ASTM E34 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Test Methods for Chemical Analysis of Aluminum and Aluminum Base Alloys

ASTM E350 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron and Wrought Iron

ASTM E352 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

ASTM E353 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

ASTM E354 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Test Methods for Chemical Analysis of High Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

ASTM E663 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Practice for Flame Atomic Absorption Analysis

Dimensional Inspection


Dimensional Inspection


External thread parameters - system 21


ANSI/ASME B1.3M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

FED-STD-H28/20A -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread Standards for Federal Service, Section 20 Inspection Methods for Acceptability of UN, UNR, UNJ, M, and MJ Screw-Threads

MIL-S-7742 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Threads, Standard, Optimum Selected Series: General Specification for

External thread parameters - system 22


ANSI/ASME B1.3M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

FED-STD-H28/20A -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread Standards for Federal Service, Section 20 Inspection Methods for Acceptability of UN, UNR, UNJ, M, and MJ Screw-Threads

MIL-S-7742 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Threads, Standard, Optimum Selected Series: General Specification for

MIL-S-8879 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread, Controlled Radius Root with Increased Minor Diameter; General Specification for

External thread parameters - system 23


ANSI/ASME B1.3M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

FED-STD-H28/20A -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread Standards for Federal Service, Section 20 Inspection Methods for Acceptability of UN, UNR, UNJ, M, and MJ Screw-Threads

MIL-S-7742 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Threads, Standard, Optimum Selected Series: General Specification for

MIL-S-8879 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread, Controlled Radius Root with Increased Minor Diameter; General Specification for

Internal thread parameters - system 21


ANSI/ASME B1.3M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

FED-STD-H28/20A -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread Standards for Federal Service, Section 20 Inspection Methods for Acceptability of UN, UNR, UNJ, M, and MJ Screw-Threads

MIL-S-7742 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Threads, Standard, Optimum Selected Series: General Specification for

Internal thread parameters - system 22


ANSI/ASME B1.3M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

FED-STD-H28/20A -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread Standards for Federal Service, Section 20 Inspection Methods for Acceptability of UN, UNR, UNJ, M, and MJ Screw-Threads

MIL-S-7742 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Threads, Standard, Optimum Selected Series: General Specification for

MIL-S-8879 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread, Controlled Radius Root with Increased Minor Diameter; General Specification for

Internal thread parameters - system 23


ANSI/ASME B1.3M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

FED-STD-H28/20A -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread Standards for Federal Service, Section 20 Inspection Methods for Acceptability of UN, UNR, UNJ, M, and MJ Screw-Threads

MIL-S-7742 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Threads, Standard, Optimum Selected Series: General Specification for

MIL-S-8879 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Screw Thread, Controlled Radius Root with Increased Minor Diameter; General Specification for

Mechanical and Physical Testing and Inspection


Corrosion


Copper sulfate test - test for free iron on the surface of fasteners


ASTM A262 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Practices for Detecting Susceptibility to Interangular Attack in Austenitic Stainless Steels, Sections 22-31, Practice E - Copper-Copper Sulfate-Sulfuric Test

Nitric acid test for susceptibility to intergranular attack in austenitic stainless steels


ASTM A262 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels, Sections 15 to 21, Practice C - Nitric Acid Test for Detecting Susceptibility to intergranular Attack in Austenitic Stainless Steels

Oxalic acid etch test for classification of etch structures of austenitic stainless steel


ASTM A262 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels, Sections 3 to 7, Practice A - Oxalic Acid Etch Test for Classification of Etch Structures of Austenitic Stainless Steel

Salt spray testing of fasteners


ASTM B117 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method of Salt Spray (Fog) Testing

Embrittlement


Hydrogen embrittlement (stress durability) of externally threaded fasteners


DOD-STD-1312-105 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Fastener Test Methods, Metric, Method 105, Stress Durability

MIL-STD-1312-5 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Fastener Test Methods, Method 5, Stress Durability

Hydrogen embrittlement (stress durability) of internally threaded fasteners (nuts)


MIL-STD-1312-14 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Fastener Test Methods, Method 14, Stress Durability - Internally Threaded Fasteners

Test for embrittlement of metallic coated externally threaded fasteners


ASTM F606 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 7: Test for Embrittlement of Metallic Coated Externally Threaded Fasteners

ASTM F606M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 7: Test for Embrittlement of Metallic Coated Externally Threaded Fasteners

Hardness


Microhardness of fasteners


ASTM E384 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method for Microhardness of Materials

MIL-STD-1312-6 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Fastener Test Methods, Method 6, Hardness

Rockwell hardness of fasteners


ASTM A370 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products Section 18. Rockwell Test (ASTM E18 is referenced for detailed requirements)

ASTM E18 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

MIL-STD-1312-6 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Fastener Test Methods, Method 6, Hardness

SAE J417 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Hardness Tests and Hardness Number Conversions (ASTM E18 is referenced for detailed requirements)

Vickers hardness - test forces from 9.807 to 1176 N (1 to 120 kgf)


ASTM E384 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method for Microhardness of Materials

ASTM E92 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method for Vickers Hardness of Metallic Materials

Impact


Charpy impact (v-notch) testing


ASTM A370 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products Sections 19 to 28 Charpy Impact Testing

ASTM E23 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

Proof


Cone proof load of internally threaded fasteners (nuts)


ASTM F606 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 4.3: Cone Proof Load Test

ASTM F606M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 4.3: Cone Proof Load Test

IFI 533 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Surface Discontinuities on Metric Nuts Section 5.1: Cone Proof Load Test (ASTM F606 is referenced for requirements)

SAE J122 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Surface Discontinuities on Nuts Section 4.3: Cone Proof Load Test

Proof load of full-size externally threaded fasteners


ASTM A370 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Sections A3.2.1.1 through A3.2.1.3 : Proof Load

ASTM F606 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Sections 3.2.1 through 3.2.3: Proof Load (Length Measurement)

ASTM F606M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Sections 3.2.1 through 3.2.3: Proof Load (Length Measurement)

SAE J1216 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Test Methods for Metric Threaded Fasteners, Section 3.3: Proof Load (Length Measurement)

SAE J429 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Mechanical and Material Requirements for Externally Threaded Fasteners. Section 5.3: Proof Load (Length Measurement)

Proof load of full-size eyebolts


ASTM A489 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Specification for Carbon Steel Eyebolts

ASTM F541 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Specification for Alloy Steel Eyebolts

Proof load of internally threaded fasteners (nuts)


ASTM A370 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products. Annex A3 - Steel Fasteners, Section A3.5.1: Proof Load

ASTM F606 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 4.2: Proof Load Test

ASTM F606M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 4.2: Proof Load Test

SAE J1216 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Test Methods for Metric Threaded Fasteners, Section 4: Test Methods for Internally Threaded Fasteners, Sub-Section 4.2: Proof Load

SAE J995 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Mechanical and Material Requirements for Steel Nuts. Section 5.1: Proof Load Test

Rotational Capacity


Rotational capactiy of full-size threaded fasteners


ASTM A325 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

ASTM A325M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Specification for High-Strength Bolts for Structural Steel Joints (Metric)

ASTM A563 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Specification for Carbon and Alloy Steel Nuts; Supplementary Requirements

Tensile


Axial tensile strength of full-size threaded fasteners


ASTM A370 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Section A3.2.1.4: Axial Tension Testing of Full Size Bolts

ASTM F606 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Sections 3.4.1 through 3.4.3: Axial Tension Testing of Full Size Products

ASTM F606M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers and Rivets (Metric) Sections 3.4.1 through 3.4.3: Axial Tension Testing of Full Size Products

MIL-STD-1312-8 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Fastener Test Methods, Method 8, Tensile Strength

SAE J1216 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Test Methods for Metric Threaded Fasteners, Section 3.5: Axial Tensile Strength

SAE J429 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Mechanical and Material Requirements for Externally Threaded Fasteners. Section 5.4: Axial Tensile Strength

Breaking strength of fullsize eyebolts


ASTM A489 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Specification for Carbon Steel Eyebolts

Tension testing of machined specimens from externally threaded fasteners


ASTM A370 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Section A3.2.1.7: Tension Testing of Bolts Machined to Round Test Specimens

ASTM F606 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 3.6: Tension Testing of Machined Test Specimens

ASTM F606M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 3.6: Tension Testing of Machined Test Specimens

SAE J1216 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Test Methods for Metric Threaded Fasteners, Section 3.7: Testing of Machined Test Specimens

SAE J429 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Mechanical and Material Requirements for Externally Threaded Fasteners. Section 5.6: Testing of Machined Test Specimens

Wedge tensile strength of full-size threaded fasteners


ASTM A370 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Section A3.2.1.5: Tension Testing of Full Size Bolts with a Wedge, and Section A3.2.1.6: Wedge Testing of HT Bolts Threaded to Head

ASTM F606 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Sections 3.5: Wedge Tension Testing of Full Size Bolts

ASTM F606M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 3.5: Wedge Tension Testing of Full Size Products

MIL-STD-1312-8 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Fastener Test Methods, Method 8, Tensile Strength

SAE J1216 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Test Methods for Metric Threaded Fasteners, Section 3.6: Wedge Tensile Strength

SAE J429 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Mechanical and Material Requirements for Externally Threaded Fasteners. Section 5.5: Wedge Tensile Strength

Yield strength of full-size externally threaded fasteners


ASTM A370 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Section A3.2.1.3(a): (Proof Load) Method 2, Yield Strength

ASTM F606 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 3.2.4 (Proof Load) Method 2, Yield Strength

ASTM F606M -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 3.2.4: (Proof Load) Method 2, Yield Strength

MIL-STD-1312-8 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Fastener Test Methods, Method 8, Tensile Strength

Washer Tests


Compression testing of metallic materials


ASTM F959 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

Compression load of compressible-washer-type direct tension indicators


ASTM F959 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

Metallography


Metallography


Decarburization and case depth measurement in fasteners


ASTM E1077 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens

ASTM E384 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method for Microhardness of Materials

SAE J121 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Decarburization in Hardened and Tempered Threaded Fasteners

SAE J423 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Methods of Measuring Case Depth

SAE J78 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Steel Self-Drilling Tapping Screws, Appendix: Recommended Technique for Measuring Case Depth

Determination of grain size of fasteners


ASTM E112 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Determining Average Grain Size

SAE J418 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Grain Size Determination of Steels

Macroscopic examination of fasteners by etching


ASTM E340 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method for Macroetching Metals and Alloys

ASTM E381 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

SAE J1061 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Surface Discontinuities on General Application Bolts, Screws, and Studs

SAE J123 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Surface Discontinuities on Bolts, Screws, and Studs

Microscopic examination of fasteners by etching


ASTM B487 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section

ASTM E1077 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens

ASTM E407 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Practice for Microetching Metals and Alloys

Non Destructive Tests


Non Destructive Tests


Liquid penetrant inspection of fasteners


ASTM E1417 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Practice for Liquid Penetrant Examination

ASTM E165 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Practice for Liquid Penetrant Inspection Method

MIL-STD-271 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Requirements for Nondestructive Testing Methods

MIL-STD-6866 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Inspection, Liquid Penetrant

Magnetic particle inspection of fasteners


ASTM E1444 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Practice for Magnetic Particle Inspection

ASTM E709 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Standard Practice for Magnetic Particle Examination

MIL-STD-1949 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Military Standard, Inspection, Magnetic Particles

MIL-STD-271 -
STATUS: Accredited
Start Date: 05/30/1997 Eff. Date: 05/30/1997 Exp. Date: 03/31/1999
Requirements for Nondestructive Testing Methods