Approved Laboratory List
MMA Laboratories

Laboratory Listing by Accreditation Body
Laboratory Listing by Country & State
Laboratory Listing by Lab Name
Lab Code: A2LA478
Lab Name: MMA Laboratories
Accrediting Body: American Assoc. for Lab Accreditation
Laboratory Contact:
Mr. Sam C Jackins
2 Pheasant Run
Newtown, PA 18940
Phone: 215 579 7500
Fax: 215 579 7591
E-Mail:

Chemical Analysis


Chemical Analysis


Combustion analysis for carbon, sulfur, oxygen, nitrogen, and hydrogen


ASTM E1019 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and Iron, Nickel and Cobalt Alloys

Optical emission spectrochemical analysis


ASTM E1086 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique

ASTM E1251 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Argon Atmosphere, Point-to-Plane, Unipolar Self-Initiating Capacitor Discharge

ASTM E415 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel

Dimensional Inspection


Dimensional Inspection


Dimensions of general purpose fasteners and high-volume machine assembly fasteners


MIL-STD-120 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Gage Inspection

Mechanical and Physical Testing and Inspection


Corrosion


Copper sulfate test - test for free iron on the surface of fasteners


ASTM A262 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Practices for Detecting Susceptibility to Interangular Attack in Austenitic Stainless Steels, Sections 22-31, Practice E - Copper-Copper Sulfate-Sulfuric Test

Oxalic acid etch test for classification of etch structures of austenitic stainless steel


ASTM A262 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels, Sections 3 to 7, Practice A - Oxalic Acid Etch Test for Classification of Etch Structures of Austenitic Stainless Steel

Salt spray testing of fasteners


ASTM B117 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Method of Salt Spray (Fog) Testing

Elevated temperature testing


Elevated temperature testing capability


MIL-STD-1312-18 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 18, Elevated Temperature Tensile Strength

Embrittlement


Hydrogen embrittlement (stress durability) of externally threaded fasteners


MIL-STD-1312-5 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 5, Stress Durability

Hydrogen embrittlement (stress durability) of internally threaded fasteners (nuts)


MIL-STD-1312-14 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 14, Stress Durability - Internally Threaded Fasteners

Test for embrittlement of metallic coated externally threaded fasteners


ASTM F606 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 7: Test for Embrittlement of Metallic Coated Externally Threaded Fasteners

ASTM F606M -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 7: Test for Embrittlement of Metallic Coated Externally Threaded Fasteners

Hardness


Microhardness of fasteners


ASTM E384 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Method for Microhardness of Materials

MIL-STD-1312-6 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 6, Hardness

Rockwell hardness of fasteners


ASTM E18 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

ASTM F606 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets; Sections 4.1, Product Hardness

ASTM F606M -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets; Section4.1, Product Hardness

MIL-STD-1312-6 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 6, Hardness

Vickers hardness - test forces from 9.807 to 1176 N (1 to 120 kgf)


ASTM E384 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Method for Microhardness of Materials

ASTM E92 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Method for Vickers Hardness of Metallic Materials

Impact


Charpy impact (v-notch) testing


ASTM A370 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Method and Definitions for Mechanical Testing of Steel Products Sections 19 to 28 Charpy Impact Testing

ASTM E23 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

Magnetic permeability


Magnetic Permeability


ASTM A342 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Permeability of Feebly Magnetic Materials, Test Method 3, Low-Mu Permeability Indicator Method of Test, Sections 17-21

Prevailing torque


Prevailing torque


IFI-100/107 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Prevailing-Torque Type Steel Hex and Hex Flange Nuts, Regular and Light Hex Series

Proof


Cone proof load of internally threaded fasteners (nuts)


ASTM F606 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 4.3: Cone Proof Load Test

ASTM F606M -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 4.3: Cone Proof Load Test

SAE J122 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Surface Discontinuities on Nuts Section 4.3: Cone Proof Load Test

Proof load of full-size externally threaded fasteners


ASTM F606 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Sections 3.2.1 through 3.2.3: Proof Load (Length Measurement)

ASTM F606M -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Sections 3.2.1 through 3.2.3: Proof Load (Length Measurement)

ISO 898-1 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Mechanical Properties of Fasteners - Part 1: Bolts, Screws and Studs. Section 8.4: Proofing Load Test for Full Size Bolts.

SAE J429 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Mechanical and Material Requirements for Externally Threaded Fasteners. Section 5.3: Proof Load (Length Measurement)

Proof load of internally threaded fasteners (nuts)


ASTM F606 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 4.2: Proof Load Test

ASTM F606M -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 4.2: Proof Load Test

ISO 898-2 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Mechanical Properties of Fasteners - Part 2: Nuts with Specified Proof Load Values. Section 8.1: Proof Load Test

SAE J995 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Mechanical and Material Requirements for Steel Nuts. Section 5.1: Proof Load Test

Rotational Capacity


Rotational capactiy of full-size threaded fasteners


ASTM A325 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

Screw Tests


Drill-drive test


SAE J78 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Steel Self-Drilling Tapping Screws

Drive test


SAE J81 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
SAE Standard, Thread Rolling Screws

Ductility test of thread rolling and self-drilling tapping screws


SAE J78 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
SAE Standard, Steel Self-Drilling Tapping Screws

SAE J81 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
SAE Standard, Thread Rolling Screws

Torsional strength test of thread rolling and self-drilling tapping screws


SAE J78 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Steel Self-Drilling Tapping Screws

SAE J81 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Thread Rolling Screws

Shear


Double shear of externally threaded fasteners


MIL-STD-1312-13 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 13, Double Shear Test

Single shear of externally threaded fasteners


ASTM F606 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets Section 3.8: Single Shear Test (Note: Primarily used for testing ASTM Specification A394 tower bolts)

MIL-STD-1312-20 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 20, Single Shear

Stress Rupture


Stress rupture of fasteners


MIL-STD-1312-10 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 10, Stress Rupture

Tensile


Axial tensile strength of full-size threaded fasteners


ASTM E8 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Tension Testing of Metallic Materials

ASTM F606 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Sections 3.4.1 through 3.4.3: Axial Tension Testing of Full Size Products

ASTM F606M -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers and Rivets (Metric) Sections 3.4.1 through 3.4.3: Axial Tension Testing of Full Size Products

ISO 898-1 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Mechanical Properties of Fasteners - Part 1: Bolts, Screws and Studs. Section 8.2: Tensile Test for Full-Size Bolts, Screws and Studs.

MIL-STD-1312-18 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 18, Elevated Temperature Tensile Strength (Accreditation of the supplementary test method Elevated Temperature Testing Capability is required)

MIL-STD-1312-8 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 8, Tensile Strength

Breaking strength of fullsize eyebolts


MIL-STD-1312-8 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 8, Tensile Strength

Tension testing of machined specimens from externally threaded fasteners


ASTM A370 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Section A3.2.1.7: Tension Testing of Bolts Machined to Round Test Specimens

ASTM E8 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Test Methods for Tension Testing of Metallic Materials

ASTM F606 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 3.6: Tension Testing of Machined Test Specimens

ASTM F606M -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 3.6: Tension Testing of Machined Test Specimens

ISO 898-1 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Mechanical Properties of Fasteners - Part 1: Bolts, Screws and Studs. Section 8.1: Tensile Test for Machined Test Pieces

MIL-STD-1312-8 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 8, Tensile Strength

Wedge tensile strength of full-size threaded fasteners


ASTM E8 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Tension Testing of Metallic Materials

ASTM F606 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Sections 3.5: Wedge Tension Testing of Full Size Bolts

ASTM F606M -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 3.5: Wedge Tension Testing of Full Size Products

ISO 898-1 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Mechanical Properties of Fasteners - Part 1: Bolts, Screws and Studs. Section 8.5: Test for Strength Under Wedge Loading of Full-Size Bolts and Screws (Not Studs)

MIL-STD-1312-18 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 18, Elevated Temperature Tensile Strength (Accreditation of the supplementary test method Elevated Temperature Testing Capability is required)

MIL-STD-1312-8 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 8, Tensile Strength

Yield strength of full-size externally threaded fasteners


ASTM A370 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Section A3.2.1.3(a): (Proof Load) Method 2, Yield Strength

ASTM F606 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 3.2.4 (Proof Load) Method 2, Yield Strength

MIL-STD-1312-18 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 18, Elevated Temperature Tensile Strength (Accreditation of the supplementary test method Elevated Temperature Testing Capability is required)

MIL-STD-1312-8 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Fastener Test Methods, Method 8, Tensile Strength

Washer Tests


Compression testing of metallic materials


ASTM F959 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

Metallography


Metallography


Decarburization and case depth measurement in fasteners


ASTM E3 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Practice for Preparation of Metallographic Specimens

ASTM E384 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Method for Microhardness of Materials

SAE J121 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Decarburization in Hardened and Tempered Threaded Fasteners

Determination of grain size of fasteners


ASTM E112 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining Average Grain Size

ASTM E3 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Practice for Preparation of Metallographic Specimens

Macroscopic examination of fasteners by etching


ASTM E3 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Practice for Preparation of Metallographic Specimens

Microscopic examination of fasteners by etching


ASTM E112 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Test Methods for Determining Average Grain Size

ASTM E3 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Practice for Preparation of Metallographic Specimens

ASTM E407 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Practice for Microetching Metals and Alloys

Surface discontinuities of externally threaded fasteners


ASTM F788 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Specifications for Surface Discontinuities of Bolts, Screws, and Studs, Inch Series

SAE J1061 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Surface Discontinuities on General Application Bolts, Screws, and Studs

SAE J123 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Surface Discontinuities on Bolts, Screws, and Studs

Surface discontinuities of internally threaded fasteners (nuts)


SAE J122 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Surface Discontinuities on Nuts

Non Destructive Tests


Non Destructive Tests


Liquid penetrant inspection of fasteners


MIL-STD-6866 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Inspection, Liquid Penetrant

Magnetic particle inspection of fasteners


ASTM E1444 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Standard Practice for Magnetic Particle Inspection

MIL-STD-1949 -
STATUS: Accredited
Start Date: 10/17/1997 Eff. Date: 10/17/1997 Exp. Date: 07/31/1998
Military Standard, Inspection, Magnetic Particles