Approved Laboratory List
Westmoreland Mechanical Testing
Laboratory Listing by Accreditation Body
Laboratory Listing by Country & State
Laboratory Listing by Lab Name
Lab Code: PRI 100015
Lab Name: Westmoreland Mechanical Testing
Accrediting Body: NADCAP/PRI
Laboratory Contact:
Mr. Michael G Self
and Research, Inc.
Old Rte. 30., Westmoreland Drive
Youngstown, PA 15696-0388
Phone: 412-537-3131
Fax: 412-537-3151
E-Mail:
Chemical Analysis
Chemical Analysis
Combustion analysis for carbon, sulfur, oxygen, nitrogen, and hydrogen
ASTM E1019 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and Iron, Nickel and Cobalt Alloys
ASTM E1447 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Test Method for the Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Methods
Optical emission spectrochemical analysis
ASTM E1086 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
ASTM E227 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to Plane Technique
ASTM E327 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Method for Optical Emission Spectrometric Analysis of Stainless Type 18-8 Steels by the Point-to-Plane Technique
ASTM E415 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
WMT&R5163 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
(Documented In-House Test Method)
Optical emission spectrochemical analysis.
Solution chemical analysis
ASTM E1184 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
(Documented In-House Test Method)
Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis
ASTM E663 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Practice for Flame Atomic Absorption Analysis
Mechanical and Physical Testing and Inspection
Adhesion
Adhesion of metallic coatings on fasteners
ASTM B571 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Adhesion of Metallic Coatings
Aerospace Nut Test
Permanent set test of self-locking nuts
AS 1371 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nuts, Self-Locking, Corrosion Resistant Steel, High Strength, Prevailing Torque, All Metal, 800 °F (427 °C) Use, UNJ Thread Form
MIL-N-25027 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nut, Self-Locking, 250 °F, 450 °F, 800 °F
NAS 3350 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nuts, Self Locking, 450 °F and 800 °F, High Quality, Procurement Specification
Push out test of floating plate nuts, gang channel nuts, and anchor nuts
MIL-N-25027 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nut, Self-Locking, 250 °F, 450 °F, 800 °F
MIL-N-25027 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nut, Self-Locking, 250 °F, 450 °F, 800 °F
NAS 3350 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nuts, Self Locking, 450 °F and 800 °F, High Quality
Reusability test of self-locking internally threaded fasteners
MIL-N-25027 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nut, Self-Locking, 250 °F, 450 °F, 800 °F
NAS 3350 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nuts, Self Locking, 450 °F and 800 °F, High Quality, Procurement Specification
Torque-out test
MIL-N-25027 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nut, Self-Locking, 250 °F, 450 °F, 800 °F
MIL-N-25027 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nut, Self-Locking, 250 °F, 450 °F, 800 °F
NAS 3350 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nuts, Self Locking, 450 °F and 800 °F, High Quality, Procurement Specification
Wrench torque test of externally wrenched nuts of spline and hexagon and double hexagon (12 point) w
MIL-N-25027 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nut, Self-Locking, 250 °F, 450 °F, 800 °F
NAS 3350 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Nuts, Self Locking, 450 °F and 800 °F, High Quality, Procurement Specification
Bend
Bend test of full size bolts
ASTM A370 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods and Definitions for Mechanical Testing of Steel Products Section 14. Bend
Coating
Measurement of fastener coating thickness - microscopial method
ASTM B487 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
MIL-STD-1312-12 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Method 12, Thickness of Metallic Coatings
Corrosion
Humidity testing of fasteners
MIL-STD-1312-3 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Method 3, Humidity
MIL-STD-753 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Corrosion-Resistant Steel Parts: Sampling, Inspection and Testing for Surface Passivation, Test Method 101, High Humidity Test
QQ-P-35 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Federal Specification, Passivation Treatments for Corrosion-Resistant Steel
Nitric acid test for susceptibility to intergranular attack in austenitic stainless steels
ASTM A262 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels, Sections 15 to 21, Practice C - Nitric Acid Test for Detecting Susceptibility to intergranular Attack in Austenitic Stainless Steels
Salt spray testing of fasteners
ASTM B117 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Method of Salt Spray (Fog) Testing
MIL-STD-1312-1 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Method 1, Salt Spray
Stress corrosion of fasteners
DOD-STD-1312-109 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Metric, Method 109, Stress Corrosion
MIL-STD-1312-9 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Method 9, Stress Corrosion
Elevated temperature testing
Elevated temperature testing capability
MIL-STD-1312-18 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Method 18, Elevated Temperature Tensile Strength
Embrittlement
Hydrogen embrittlement (stress durability) of externally threaded fasteners
DOD-STD-1312-105 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Metric, Method 105, Stress Durability
MIL-STD-1312-5 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Method 5, Stress Durability
Test for embrittlement of metallic coated externally threaded fasteners
ASTM F606 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 7: Test for Embrittlement of Metallic Coated Externally Threaded Fasteners
Fatigue
Fatigue of full-size threaded fasteners
DOD-STD-1312-111 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Metric, Method 111, Tension Fatigue
MIL-STD-1312-11 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods. Method 11, Tension Fatigue
NAS 1069 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Tension Fatigue Test Procedure for Aeronautical Fasteners
Hardness
Brinell hardness of fasteners
ASTM A370 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Method and Definitions for Mechanical Testing of Steel Products Section 16. Brinell Test
ASTM E18 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
ASTM F606 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners; Section 4.1, Product Hardness
Microhardness of fasteners
ASTM E384 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Method for Microhardness of Materials
MIL-STD-1312-6 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Method 6, Hardness
Rockwell hardness of fasteners
ASTM A370 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Method and Definitions for Mechanical Testing of Steel Products Section 18. Rockwell Test (ASTM E18 is referenced for detailed requirements)
ASTM E18 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
ASTM F606 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets; Sections 4.1, Product Hardness
Impact
Charpy impact (v-notch) testing
ASTM A370 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Method and Definitions for Mechanical Testing of Steel Products Sections 19 to 28 Charpy Impact Testing
Proof
Cone proof load of internally threaded fasteners (nuts)
ASTM F606 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 4.3: Cone Proof Load Test
Proof load of full-size externally threaded fasteners
ASTM A370 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Sections A3.2.1.1 through A3.2.1.3 : Proof Load
ASTM F606 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets.
Sections 3.2.1 through 3.2.3: Proof Load (Length Measurement)
SAE J429 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Mechanical and Material Requirements for Externally Threaded Fasteners
Proof load of internally threaded fasteners (nuts)
ASTM A370 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Method and Definitions for Mechanical Testing of Steel Products.
Annex A3 - Steel Fasteners, Section A3.5.1: Proof Load
ASTM F606 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 4.2: Proof Load Test
SAE J995 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Mechanical and Material Requirements for Steel Nuts. Section 5.1: Proof Load Test
Shear
Double shear of externally threaded fasteners
ASTM B565 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
MIL-STD-1312-13 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Method 13, Double Shear Test
Stress Rupture
Stress rupture of fasteners
ASTM E292 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Practice for Conducting Time-for Rupture Notch Tension Tests of Materials
MIL-STD-1312-10 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Method 10, Stress Rupture
Tensile
Axial tensile strength of full-size threaded fasteners
ASTM A370 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Method and Definitions for Mechanical Testing of Steel Products
Annex A3 - Steel Fasteners, Section A3.2.1.4: Axial Tension Testing of Full Size Bolts
ASTM E8 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Tension Testing of Metallic Materials
ASTM F606 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Sections 3.4.1 through 3.4.3: Axial Tension Testing of Full Size Products
DOD-STD-1312-108 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Metric, Method 108, Tensile Strength
MIL-STD-1312-8 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Method 8, Tensile Strength
Tension testing of machined specimens from externally threaded fasteners
ASTM A370 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Method and Definitions for Mechanical Testing of Steel Products
Annex A3 - Steel Fasteners, Section A3.2.1.7: Tension Testing of Bolts Machined to Round Test Specimens
ASTM E8 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Test Methods for Tension Testing of Metallic Materials
ASTM F606 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets.
Section 3.6: Tension Testing of Machined Test Specimens
Total extension at fracture of externally threaded fasteners
ASTM F606 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets.
Section 3.7: Total Extension at Fracture Test
Wedge tensile strength of full-size threaded fasteners
ASTM A370 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Section A3.2.1.5: Tension Testing of Full Size Bolts with a Wedge, and Section A3.2.1.6: Wedge Testing of HT Bolts Threaded to Head
ASTM E8 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Tension Testing of Metallic Materials
ASTM F606 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets.
Sections 3.5: Wedge Tension Testing of Full Size Bolts
DOD-STD-1312-108 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Metric, Method 108, Tensile Strength
ISO 898-1 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Mechanical Properties of Fasteners - Part 1: Bolts, Screws and Studs.
Section 8.5: Test for Strength Under Wedge Loading of Full-Size Bolts and Screws (Not Studs)
Yield strength of full-size externally threaded fasteners
ASTM A370 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Method and Definitions for Mechanical Testing of Steel Products
Annex A3 - Steel Fasteners, Section A3.2.1.3(a): (Proof Load) Method 2, Yield Strength
ASTM F606 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets.
Section 3.2.4 (Proof Load) Method 2, Yield Strength
Torque-tension
Locking Torque
MIL-STD-25027 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
(Documented In-House Test Method)
Locking Torque
MIL-F-18240 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Element, Self Locking, Threaded Fastener, 250 Deg. F Maximum
MIL-STD-1312-31 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Method 31, Torque
Recess strength test in both the installation and removal directions
MIL-B-87114 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
(Documented In-House Test Method)
Recess Torque
MIL-STD-1312-25 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fastener Test Methods, Method 25, Driving Recess Torque Quality Conformance Test
Washer Tests
Temper test of lock washers
FF-W-100C -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Federal Specification, Washer, Lock, Tooth. Compression and Flattening Test
Metallography
Metallography
Microscopic examination of fasteners by etching
ASTM E112 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Standard Test Methods for Determining Average Grain Size
NAS 4002 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fasteners, Alloy Steel, Externally Threaded, 160 KSI Fsu, 450 Deg. F
NAS 4004 -
STATUS: Accredited
Start Date: 12/05/1997 Eff. Date: 12/05/1997 Exp. Date: 04/30/2000
Fasteners, 6A1-4V Titanium Alloy, Externally Threaded, 160 KSI Ftu, 95 KSI Ftu, 450 Deg. F